The glass must be handled and cleaned correctly during installation. Glass products can be permanently damaged if improperly managed and cleaned.
Glasscope recommends strict compliance with the following procedures.
Uniformly apply mild soap and water or a non-abrasive commercial window washing solution to the surface using applicator methods. Remove all liquid from the surface with a soft flannel or cotton cloth immediately following the application of the cleaning solutions. Care should ensure that no metal, sand, or foreign particles become trapped between the fabric and the substrate.
These particles will mar and damage the glazing if allowed to contact the glass surface. All cleaning solutions should be dried from the window gaskets and sealants to avoid the potential for deterioration due to the cleaning process.
Do not apply cleaners in direct sunlight or at elevated temperatures. Do not use razor blades or squeegees to clean hard-to-remove substances from specific glass surfaces.
